Vancouver, British Columbia, November 30th , 2017 – Advantage Lithium Corp. (the "Company" or "Advantage Lithium") (TSX Venture: AAL) (OTCQX: AVLIF) is pleased to provide this update on the sampling of diamond core hole CAU16 in the previously undrilled NW Sector of the Cauchari JV property located in Jujuy Province, Argentina.
Vice President Project Development Andy Robb commented: “The results from the systematic sampling of CAU16 confirm the continuation of the brine body south from CAU07, while the presence of sandy sediments throughout the hole is very positive for brine extraction. We will continue drilling in the SE and NW sectors into 2018, having secured three drill rigs capable of completing our program to fully delineate the potential for high yielding sand zones. Now that the program is more advanced Frits Reidel of hydrogeological consultants FloSolutions will be acting as the nominated QP for the future reporting of exploration results, leading up to a new resource estimate. FloSolutions are currently providing independent oversight of drilling and sampling activities.”
CAU16 Drilling Results
Sampling delineated a high-grade brine interval averaging 529 mg/l Lithium and 4,306 mg/l Potassium over 81 m within the larger brine body which extends vertically over at least 284 m (sampling was not completed to the base of the hole at 321.5 m). The average concentration over the drill length of CAU16 (to 298m) is 436 mg/l Lithium and 3,608 mg/l Potassium from 40 primary samples, taken at systematic depth intervals throughout the hole, including the high-grade interval. The four brine samples within the previously reported 169 m to 199 m interval average 619 mg/l Lithium and are part of the 81 m interval average 529 mg/l Lithium.
The brine body defined to date continues from CAU07 in the north, through CAU16 and further south to hole CAU15, which is currently being drilled. This is a distance of over 12.5 km approximately north south. These diamond core holes have all intersected relatively permeable sandy sediments that are expected to yield relatively high pumping rates from the NW Sector, which is very positive for future brine extraction.
Brine sampling was undertaken systematically at nominal 6 m depth intervals using both bailer and packer sampling equipment, depending on the conditions encountered in the hole. The average concentration for the high-grade interval (118-199 m) and average concentration over the entire length of CAU16 (to 298 m) is based on both bailed and packer samples.
The Mg/Li ratio in all brine samples is consistently low, averaging 2.5:1 across all the samples, and 2.3:1 in the high-grade interval. The consistently low Mg/Li ratio confirms the suitability of the brine for conventional brine processing, as applied at the nearby Olaroz project.
Drill core samples from CAU07 and CAU16 have been sent to an experienced porosity laboratory in the United States, where they will be analysed for drainable porosity characteristics for use in the upcoming resource estimate.
Figure 1: Location of CAU16 and other drill holes
SE Sector Drilling - CAU08 and CAU11 Progress
In the SE sector, well development and pump installations have been completed on rotary holes CAU08 and CAU11 in preparation for initial pumping tests and collection of composite brine samples. Results of this test work are anticipated to be reported in December 2017.
President and CEO Mr David Sidoo also commented “These results give us further confidence to continue our exploration efforts in the very strategic NW sector, located immediately south of the Orocobre Olaroz properties. The CAU16 results suggest the brine body here has the potential to be an important part of the project resource base with good Lithium grades and a low Mg/Li ratio capable of supporting a stand-alone processing facility.”
The technical information in this news release has reviewed and approved on behalf of the company by Murray Brooker, MAIG, RPGeo, a “Qualified Person” as defined in NI 43-101.
ADVANTAGE LITHIUM CORP.
Per: “David Sidoo”
David Sidoo, President
Tel: 604.343.3760 | Fax: 604.683.1585
Email: [email protected]
About Advantage Lithium Corp.
Advantage Lithium Corp. is a resource company specializing in the strategic acquisition, exploration and development of lithium properties and is headquartered in Vancouver, British Columbia. The common shares of the company are listed on the TSX Venture Exchange (TSX-V:AAL), and the company is also traded on the OTCQX Best Market in the U.S. (OTCQX: AVLIF). The company has acquired a 100% interest in five projects in Argentina and has acquired a 75% interest in a sixth, called Cauchari. The Cauchari project is located just 20 km south of Orocobre’s flagship Olaroz Lithium Facility.
Further information about the Company can be found at www.advantagelithium.com.
Certain information contained in this press release constitutes “forward-looking information", within the meaning of Canadian legislation. Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "is expected","intends", or “has the potential to”. Forward looking statements contained in this press release may include statements regarding the future operating or financial performance of Advantage that involve known and unknown risks and uncertainties which may not prove to be accurate. Actual results and outcomes may differ materially from what is expressed or forecasted in these forward-looking statements. Such statements are qualified in their entirety by the inherent risks and uncertainties surrounding future expectations. The forward-looking statements included in this press release are made as of the date of this press release and the Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as expressly required by applicable securities legislation.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Table 1: Drill hole location and details
Table 2: Brine sample results from CAU16